\n \nCombining the best of both worlds, the Solo Studio Multi-Voice Channel Strip allows users to choose between a pristine low-noise/low-distortion solid state transistor circuit and a warmer Class-A tube mic preamp. Along with the flexible Tilt EQ control, users can voice the Solo Studio to create their own signature sound. \n \nFeaturing 48V phantom power, a front Microphone/Line balanced input or a high impedance Instrument input, users can tailor the Solo Studio to suit any sound source. A Low-Cut control allows vocals to be sculpted for clarity while the Tilt EQ can be used to emphasize high presence or low-end warmth. \n \nThe Solo Series of single channel rackmount units have been developed for the recording enthusiast with a preference for simplicity. \n \n \n

\n

Key Features

\n

\n
• 48 Volt Switchable Phantom Power
\n
• Selectable Multi-Voice Tube/Solid State Control
\n
• Hand selected 12AT7 Tube
\n
• OPTO – Analog Optical Isolators (AOI)
\n
• Optical Controlled Compression
\n
• Pre-Compression Insert Loop
\n
• Flexible Tilt EQ
\n
• Selectable Low Cut Filter (HPF)
\n
• Variable Threshold and Ratio controls
\n
• Variable Attack and Release controls
\n
• Variable Blend (Compression)
\n
• Variable Output Level Control
\n

\n

Specifications

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Frequency Response	15 Hz to 50 kHz (+0, -1dB)
Dynamic range	>110dB (“A” weighted)
CMRR	>90dB
THD	<0.005% (typical)
Equivalent Input Noise	-129dBu (XLR, “A” weighted)
Maximum Input Level	+19dBu (XLR)
Maximum Instrument Input	+17dBu
Input Impedance	47k ohms (XLR), \n \n>800k ohms (Instrument)
Maximum Output Level)	+27dBu (XLR
Output Impedance	< 47 ohms (XLR)
Maximum Gain	55dBMeter
Attack Time	0.25msec. to 50msec. variable
Release Time	150msec. to 3sec. variable
CMRR	>90dB THD <0.005% (typical
Calibration	0VU = +4dBu output (+4dBu mode) \n \n0VU = -10dBV output (-10dBV mode)
Low Cut Filter	single pole, 80Hz
Tilt EQ	+/- 3dB adjustable
Power Requirements	100-240V 50Hz/60Hz
Dimensions:	(HxWxD) 4.45 cm x 48.3 cm x 15.2 cm
Weight	2.5kg
Box Dimensions	12.6 cm x 51.8 cm x 18.9 cm

\nNote: 0 dBu = 0.775Vrms \n \n

\n \n  \n \n