\n \nThe TransX two channel microphone preamplifier features a new low noise discrete transformer coupled high performance preamplification circuit. Building upon the quality and success of great sounding products like the Pro MPA II and the Pro VLA II, ART engineers set out to develop the next generation of professional microphone preamplifier to compliment our tube-based preamps. The TransX sets a new standard for quality and value. Professional features and spectacular tone are what make the TransX a world-class microphone preamplifier. \n

Key Features

\n

\n
• Input Transformer blocks R.F. and other noise
\n
• Custom Output Transformer reduces ground noise and maintains level for Balance/Unbalanced connections
\n
• Low noise, low THD discrete audio path
\n
• High impedance direct coupled low noise Instrument input
\n
• Variable input impedance on the XLR input
\n
• Rotary switches allow for reliable, repeatable results
\n
• Gain trim function for precise adjustment of gain
\n
• 20dB pad allows high level XLR input signals
\n
• Wide range peak sensitive LED meter
\n
• Phase reverse switch
\n
• Auto muting on outputs
\n
• Ground lift function on each channel’s outputs
\n
• Universal External supply reduces noise and lowers power consumption
\n
• Rugged, reliable steel chassis shields the preamp from external noise
\n

\n \n \n

\n \nSpecifications: \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Frequency Response	10-50kHz + 1dB
Total Harmonic Distortion	<0.009% @1kHz, +4dBu out
CMRR	90dB @60Hz
Equivalent Input Noise	Mic (@max gain) -128dBu “C” wtd. \nInst. (@ max gain) -125dBu “C” wtd.
Input Impedance	Mic 150 to 1k Ohm variable \nInstrument 1M Ohm
Maximum Gain	Mic in to output (bal.) +68dB \nInst. IN to Main output (bal.) +59dB
Maximum Input Level	XLR +24dBu \nInstrument +15dBu
Maximum Output Level	+24dBu
Output Impedance	100 Ohms
Low Cut Filter	Slope 6dB/Oct. \nRange 10Hz to 200 Hz \nStep size 1/3 Oct.
Phantom Power	Switch selectable, +48V DC, filtered, current limited
Chassis Type	Chassis Steel, Painted finish
Power Supply	Input requirements USA – 85 to 250 VAC/ 50-60 Hz \nExport units configured for country of destination. \nOutput requirements 48 V dc, 10 Watts Max
Dimensions	44m x 483mm x 241mm
Weight	6.0 kg

\n